Agents in meetings
Your voice agents can join a Google Meet meeting as one more participant: with their name, their face and their voice. They listen to the whole conversation, answer when someone speaks to them, use the same tools as on a call (look up a customer, check an order…), raise their hand when they have something to add and, when it is over, leave you the minutes of the meeting in the dashboard.
In the video: two agents in a real Google Meet meeting. How to invite them from the dashboard, how they answer with their flow’s tools, work at the same time, write in the chat, debate, stop when you talk over them, look at a shared screen and answer about it, the summary in History and the Join Meeting component.
Before you start
- The agent has to be deployed and turned on: it is the same agent that takes your calls, with its way of speaking, its voice, its avatar and its tools.
- The meeting has to admit guests: the agent joins as someone from outside your organisation and asks to be let in.
- You can send up to 4 agents to the same meeting.
1. Choose the model that follows meetings (optional)
After each sentence, a fast model decides whether one of the agents is being spoken to, and keeps the meeting’s summary. By default it is NappAI’s fast model and there is nothing to set up.
To use one of your own:
- Open Voice Agent and, in the Meetings section, click Meeting settings.
- In Model that follows the meeting, choose one of your model credentials (Inworld, OpenAI, Groq, Anthropic, Gemini…) and type the model. A fast one from that provider is suggested.
- In Reasoning, choose how much it thinks before deciding. Only the levels that model takes are offered; if it takes none, the field does not appear. Low is suggested.
- In Moderator context you choose how much that model reads at once, in thousands of tokens (default 128). The final summary, the artifact and the questions about the meeting are written within that limit: a longer meeting is first summarised part by part and then written from those notes, so they never fail for being long. If the chosen model takes less, what it takes is used and the panel tells you. The agents’ models are not affected.
- Click Save.
Pick a fast model: every sentence waits for its decision, so a slow model makes the agents slower to answer. Low reasoning decides better who should speak at almost no extra time; high reasoning delays it. What an agent says is always written by its own flow’s model.
2. Send the agents
- Open Voice Agent in the menu.
- Click Invite to a meeting in the Meetings section, or the camera icon on an agent’s row (that agent is already ticked, first in the list).
- Paste the Google Meet link, for example
https://meet.google.com/abc-defg-hij. - Tick the agents (you can search them by name) and choose, for each one:
- What it does:
- Takes part: answers when spoken to and adds something when it is useful.
- Answers only when spoken to: never speaks up on its own.
- Only listens and takes notes: does not speak.
- What it keeps afterwards: a summary, the summary and full transcript, or nothing.
- How the summary is written: it comes filled with NappAI’s instructions (a short summary, the decisions and the action items with their owner). Change them for that meeting if you want other sections, such as goals or risks, another format or your minutes template; Reset brings them back. The transcript is always word for word.
- Uses the chat (ticked by default): it reads what is written in the meeting’s chat and can write in it.
- Sees shared screens (not ticked by default): it can look at what someone shares when you ask it to. What is shared may be private: tick it only for the agents that need it.
- What it does:
- If you want a detailed web page of everything said, tick Create artifact: when the meeting ends you find it under Artifacts and can share it. The meeting then keeps everything that is said. See Meeting artifacts.
- In To stop an agent while it speaks you choose how much someone must say over an agent to make it stop and listen: by default, 4 words over 1.2 seconds. Lower stops it sooner; higher, a “yes”, an “OK” or a cough never cuts it.
- At the bottom you see the model that follows the meeting: your setting’s. You can change it for this meeting only.
- Click Send to the meeting.
Joining Google Meet with a Google account
Google Meet turns automated guests away more and more often (“You can’t join this video call”), even when the meeting admits guests. An agent that joins with a Google account is one more user and does not go through that filter.
- When inviting, tick the agent and open Joins Google Meet as. The default is A guest, under the agent’s name.
- Choose Sign in with another Google account…. A window opens with Google’s page: it is a browser on the agents’ server, the one they will join Meet with, and what you do over the image (clicks, keyboard, paste) is repeated there. At the top you will see
accounts.google.com. - Sign in as usual, with the second step if your account asks for it. When you finish, the window closes and the agent has that account.
The choice is each agent’s and it is kept: next time it joins with the same account. Several agents can use the same one. Meeting settings lists your accounts, with Sign in again and Remove.
Keep in mind:
- In the meeting the agent shows under the Google account’s name, not its own. If you want it to be called “Vera”, use an account with that name.
- The password goes to Google’s page and NappAI does not keep it. What stays on the server is the signed-in session, for your agents.
- If Google stops accepting the session (you change the password, sign the account’s sessions out, or your organisation limits how long they last), the agent joins as a guest and the account shows “needs signing in again”.
- It is only used in Google Meet. In Microsoft Teams agents join as guests.
3. Let them in
Each agent asks to join under its name, like any guest. The meeting’s organiser sees it in People as a waiting guest and admits it.
Google Meet may label it “Appears to be a bot”: it is a notice for the organiser, not an error. In that case the button to let it in is in the More actions menu (⋮) next to its name, under Admit.
Google Meet sometimes turns an agent away on arrival; the agent tries again by itself, so it may ask to join a minute later than the others.
On joining, the agent greets briefly and says how to address it.
4. Talk to them
- Call it by its name to ask something: “Ana, what do you think?”. It need not be perfect: it recognises its name even when the transcription gets it slightly wrong. After that you can keep talking to it without repeating the name while that exchange lasts.
- Ask what you would ask on a call: “look up the customer Pastelería La Estación”. It says a sentence while it checks and answers with the result; if the tool needs something confirmed, it asks you and goes on with your answer.
- An agent that takes part raises its hand when it has something to add and waits until you give it the floor: “go ahead, Ana”.
- If you interrupt it, it stops: it takes talking over it as much as you chose when sending it (by default, 4 words over 1.2 seconds). A plain “yes” or “OK” does not cut it off.
- When the conversation is not for them (you are talking to another person in the meeting), they listen and keep quiet. If one has something useful, it raises its hand and waits for you to give it the floor.
- An agent is called by its name (“Vera, …”) anywhere in the sentence. By the other part of its name (“Client” in “Vera · Client”) only when you use it to call it, opening the sentence or between commas (“Client, what do you think?”): saying “the meeting with the client” does not give it the floor.
- Hand out work: “Vera, check what is pending in the emails, and then Teo, see whether that is already in the code”. They do it in that order, and the second works with what the first found. When the tasks do not depend on each other (“Teo, review this week’s code; Vera, what has the client asked for?”), they do them at the same time: one answers you and the other raises its hand when it has its part. If one needs something from the other, it asks and then finishes its part.
- Write to them in the meeting’s chat: “Vera, can you send me the report’s link?”. They read it as if you had said it aloud, and the agent you address answers. What is better read than heard (links, figures, lists) they write in the chat and tell you so aloud. If the organiser does not let participants write, they tell you aloud.
- Show them your screen: share it in Meet and ask them about it: “Teo, look at my screen: what error is there?”. The agent looks at it right then, says a short line while it does, and answers with what it sees: text, figures, errors, slides. If several screens are shared, it looks at all of them. The image is not kept, except in the meeting’s artifact if you asked for one. Only agents with Sees shared screens ticked can do it.
- Make them debate: “Teo and Vera, discuss what is most urgent until you agree”. They answer each other until they agree, and one sums it up for you. You can set how much: “three turns each”. A debate that does not converge ends with a summary of where they agree and where not.
- To stop them at any time, tell them: “ok, stop”.
5. Follow the meeting and read the minutes
While it lasts, the meeting appears in Voice Agent → Meetings with the state of its agents: queued, joining, waiting to be let in, in the meeting, or out.
- Live opens a panel with the meeting as it is: which agents are in, who attends, who has their hand raised and what was said in the last ten minutes, refreshed by itself every few seconds. At the bottom you can write a task for an agent (“have Vera tell Juan that…”, “have Teo write in the chat…”): the moderator gives it out, the agent raises its hand before speaking or writes it in the chat, and you see how each task goes (preparing, hand raised, said, written in the chat). How you invited each agent is respected: one that came in only to listen does not speak. What you see is not stored anywhere. You can also do it from another channel with Agent Control Center.
- Take out of the meeting makes all its agents leave.
- If they are left alone, they leave on their own after a minute.
- Each finished meeting shows its attendees: the people who spoke or wrote in the chat, by name, and at least how many more were there. If the meeting kept nothing, only how many.
- Finished meetings are in History, with what each agent kept under Summary, and the Artifact button if you asked for one.
If something goes wrong
| What happens | What to do |
|---|---|
| The agent shows “Could not join” | Check that the meeting admits guests and that someone was in it to let the agent in. If the meeting turned it away on arrival, the agent already tried twice more. |
| It stays on “Waiting to be let in” | Admit it from People in the meeting (look under More actions if it is labelled as a bot). |
| Takes long to answer | Check the model that follows the meeting: if it is slow or its reasoning is high, pick a fast one with low reasoning. |
| An agent answers when it was not its turn, or does not answer | Call it by its own name at the start of the sentence. If it keeps happening, check the model that follows the meeting: with low reasoning it decides better than with none. |
| It is not in the list | Only deployed agents that are turned on can be invited. |